Microstructure and Mechanical Properties of Welded Joints of Thor 115 Steel

Research was conducted on welded joints of martensitic steel Thor 115 made with two filler materials – CrMo91 and Ni 6082. The scope of the investigations included: non-destructive and destructive testing. The macro- and microstructural investigations revealed correct structure of the weld, without welding imperfections. In the joint welded with Ni 6082, the so-called Nernst’s layers and δ-ferrite grains were visible. The investigations of the analysed joints showed that their properties, i.e. tensile strength and impact strength, were higher than the required minimum, whereas hardness was lower than the maximum value of 350 HV permitted for this group.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.