Skip to content
naulon
Not checkedNot checked for notices yet.

Porous-Tube Subsurface Irrigation

F.S. Mohammad

Journal of Agricultural and Marine Sciences · 1998

doi:10.24200/jams.vol3iss2pp49-57 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This research was conducted to study the factors leading to the uniform distribution of water from a subsurface irrigation system using porous tubes. The factors included the depth at which the tubes are installed, operating pressure, depth of impermeable layer, and a gravel envelope surrounding the tubes. A laboratory soil tank was constructed to determine the effect of these factors. The tank was filled with sand and fitted with porous tubes. The tank and the tubes represent a section of soil profile. The results of this study showed that the depth of the impermeable layer affected significantly the water-table rise in the soil profile. The gravel envelope did not show any advantage over tubes without an envelope in sandy soils. A separate experiment was conducted to compare the characteristics of the flow from the porous tubes with the specifications given by the manufacturer. The results of the experiment showed that porous tubes do not work efficiently either under low pressure (below 80 kPa) or very high pressure (Le. above I50 kPa).

Abstract licence: CC BY-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.