Skip to content
naulon
Not checkedNot checked for notices yet.

Experimental identification of the degree of deformation of a wire subjected to bending

Milićević I., Popović M., Dučić N. and 3 more

Science of Sintering · 2018

doi:10.2298/sos1802183m (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This study provides experimental verification of analytical results on maximum strain εmax in elements fabricated by bending a stainless steel wire around a cylinder with given dimensions. The method of measuring the thermal electromotive force (TEMF) of a thermocouple formed by joining the deformed metal specimen to a copper (Cu) conductor showed an increase in the thermal electromotive force coefficient (TEMFC) during heating with increasing degree of plastic deformation. For known values of plastic deformation produced by straining X5CrNi1810 stainless steel wire specimens of Ø2.8 mm diameter, the TEMF was determined as a function of the extent of deformation of the thermocouple consisting of the deformed steel wire specimen and the copper conductor. Based on the correlation (calibration curve), it was shown that the relative strain of the element fabricated by bending the same wire (made of X5CrNi1810 stainless steel, Ø2.8 mm in diameter) around the cylinder of Ø10 mm diameter is 23.8 %. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. TR35037]

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.