Adaptive Symlet filter based on ECG baseline wander removal
Nahar Ali Kareem
Serbian Journal of Electrical Engineering · 2020
doi:10.2298/sjee2002187n (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In this paper, proposed a new approach of combining the hybrid soft computing technique called Adaptive Symlet Wavelet Transform (ASWT) filter. The baseline wanders (BW) noise removal from an ECG signals to minimize distortion of the S-T segment of the ECG signal specially that have high sampling frequencies. Therefore, when using Symlet Wavelet Transform (SWT) to analysis the ECG signal can cause problems to analysis, exclusively when examining the content of the ECG signal at low-frequency such as S-T segment. The corresponding frequency components of the approximation coefficients at level number seven are (0-3.9) Hz. Since the BW frequency is below 0.5 Hz and ST segment frequency between (0.67-4) Hz. The adaptive filter with a unity reference signal used to remove the BW noise below 0.5 Hz from the lowest level of the approximation coefficient of the decomposed ECG signal. The denoising output from adaptive filter and the output from SWT (the other detail coefficients) will use as an input to ISWT for reconstruction ECG signals with the remove BW signal. This method represents a very effective filter for BW noise removal, as it does not need for any computation process of reference point.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.