Not checkedNot checked for notices yet.
Displacement piles – classification and new methods for the calculation of bearing capacity
Kazimierz Gwizdała, Paweł Więcławski
Przegląd Naukowy Inżynieria i Kształtowanie Środowiska · 2020
doi:10.22630/pniks.2020.29.3.26 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The paper presents technological changes concerning not only the method of construction, but also the materials used. Another aspect is the methods of calculating the load-bearing capacity and settlement of piles. With acceptance for use the PN-EN:1997-1:2008 standard in 2010, it was necessary to change the approaches applied that based on many years of experience and tradition. The best method in this case is to forecast the full load-settlement characteristics. On the basis of the collected data, a comparative analysis of particular displacement piles technologies was made. The usefulness of individual methods of load-bearing capacity calculation depending on the pile technology was determined.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.