Skip to content
naulon

Not checkedNot checked for notices yet.

Defect Prediction at The Superplastic Forming Process of The Bipolar Plate by Simulation

Ismi Choirotin, Moch. Agus Choiron

JEMMME (Journal of Energy, Mechanical, Material, and Manufacturing Engineering) · 2018

doi:10.22219/jemmme.v3i1.5884 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Improper parameter setting at the bipolar plate forming by superplastic process will outcome damage to the final workpiece. By employing computer simulation, the defect at the bipolar plate could be predicted close to the maximum thickness reduction and the effective stress data. Simulate the fabrication of bipolar plate by a number of forming temperature (350 – 450 °C) and air pressure (0.25 – 1 MPa) utilize Ansys, resulting maximum thickness reduction and effective stress occurred at 450 °C and 1 MPa. Make reference to the result, the bipolar plate didn’t expose any deficiency with 36.75% maximum thickness reduction. Have recourse to simulation will abbreviate the trial and error method as of the production process will more effective and efficient in terms of time and cost.

Abstract licence: CC BY-NC

References8

    8 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.