Optimisation of Recycled Thermoplastic Plate (Tile)
Lonping Olivier, Alao Jimoh, Adeola Adedeji
Journal of Soft Computing in Civil Engineering · 2017
doi:10.22115/scce.2017.48972 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The purpose of this paper is to perform a structural optimization of a flat thermoplastic plate (tile). This task is developed computationally through the interface between an optimization algorithm and the finite element method with the goal of minimizing the equivalent stress with specified target stress of 2 MPa when applied with a load intensity of 1000N. A 300 x 300 x 20 mm thermoplastic plate was selected for the optimization, which was performed with a tool in MATLAB R2012b known as genetic algorithm accompanied with static analysis in ANSYS 15. The results produced the optimum equivalent stress (δopt) of 2.136 MPa with the optimum dimensions of 305 x 302 x 20 mm. Also, the dimensions of the plate with the optimum value of the equivalent stress were discovered to be within the lower and upper bound dimensions of the plate. The thermoplastic plate object of the optimization was a square plate of 300 x 300mm, and 20 mm thick with isotropic properties and a particular load and boundary conditions were applied on the entire plate.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.