Skip to content
naulon
Not checkedNot checked for notices yet.

A new Mismatch cancelation for Quadrature Delta Sigma Modulator

alireza shamsi

International Journal of Industrial Electronics, Control and Optimization · 2020

doi:10.22111/ieco.2019.29632.1167 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This paper proposes a new mismatch cancelation technique for quadrature delta-sigma modulators (QDSM). In this approach, a high speed and simple structure dynamic element matching (DEM) based on homogenization and time-division (HTD) is designed. In addition, I and Q digital-to-analog converters (DACs) are merged into one complex DAC (C_DAC) for quadrature mismatch cancelation which leads to near-perfect I/Q balance. A third-order multi-bit continuous-time (CT) QDSM for a WCDMA LOW-IF receiver is designed and implemented in 180 nm CMOS technology to investigate the effects of the proposed DEM. The proposed DEM method and DWA algorithm are applied to the QDSM with 2% mismatch errors in DAC cells and compared two outputs PSD effects. Simulation results show that the modulator achieves a signal-to-noise ratio (SNR) of 74 dB and 74.2 dB for the proposed method and DWA, respectively, while the proposed method is simpler and faster than the data weighted averaging (DWA) algorithm.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.