Preparation of Kissiris/TiO2/Fe3O4/GOx Biocatalyst: Feasibility study of MG decolorization
Vahide Elhami, Afzal Karimi
Advances in Environmental Technology · 2017
doi:10.22104/aet.2017.440 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Titanium dioxide (TiO2) and Fe3O4 magnetite particles were coated on spherical Kissirises; glucose oxidase (GOx) enzyme was immobilized on Kissiris/Fe3O4/TiO2 by physical adsorption. This catalyst was analyzed by a scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and energy dispersive X-ray (EDX) measurements. The performance of the prepared biocatalyst in the decolorization of Malachite Green dye was investigated. The optimal operation parameters were 20 mg/L, 20 mM, 5.5 and 40 ̊C for initial dye concentration, initial glucose concentration, pH and temperature, respectively. Under these conditions, a 95% Malachite Green decolorization efficiency was obtained after 150 min of reaction by using 1 g of prepared heterogeneous bio-Fenton catalyst. In this process, in contrast to a conventional Fenton’s reaction, external hydrogen peroxide and ferrous ion sources were not used. The effect of various reaction parameters such as initial concentration of dye, amount of catalyst, concentration of glucose, pH value and temperature on MG decolorization efficiency was studied.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.