Skip to content
naulon
Not checkedNot checked for notices yet.

Depended pH behavior of chitosan on surface modified fibers of Kraft pulp

Noraldin Nazarnezhad, Naser Rasol pour hedayati, Omid Ramazani

تحقیقات علوم چوب و کاغذ ایران · 2015

doi:10.22092/ijwpr.2015.101474 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Chitosan is known as a natural polymer which improves strengths of papers. So, in this study investigated improvement of chitosan absorption on modified craft fibers and increase its efficiency. The effects of chitosan were experimented in three levels of 0%, 0.75% and 1.25% on modified kraft fibers surfaces with 3% hydrogen peroxide in different pH levels (5.5, 7 and 8.5). The results showed that chitosan had better performance at low dosages and alkaline conditions. Also surface fibers modification by hydrogen peroxide caused increase of carboxyl groups and fibers anionic charge. Fibers anionic charge with participant of chitosan formed a dual system. The apparent density increased from acidic pH to alkaline. As, the highest apparent density were reached in alkaline pH and 0.75 % of chitosan. Also, tensile index and burst index of paper were reached in alkaline pH and 0.75 % of chitosan. Whereas, chitosan and the surface modified fibers of kraft pulp did not have a significant level on the tear index

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.