Inestigation on withdrawal strength and moment resistance of mortise and tenon joint
amir lashgari, Ahmad Jahan latibari
تحقیقات علوم چوب و کاغذ ایران · 2009
doi:10.22092/ijwpr.2009.117386 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The influence withdrawal strength and bending moment of mortise and tenon joint is investigated. Based on vast application of this type of different length of joint, the effect of tenon lengths (20, 30, 40, mm) and wood type (beech, alder,spruce) These strength properties is investigated. 9 combination of variables and total of 72 T-shape samples were tested at loading rate of 1.25 mm/min. The combination of variables significantly in fluences the load bearing capacity of joint. Joint produced with tenon lenghts of 30 mm and alder wood showed highest withdrawal strength and the joint produced at the tenon length and beech wood showed highest bending moment so this combination of variables is recommended.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.