Skip to content
naulon
Not checkedNot checked for notices yet.

Nonlinear behavior of steel plate shear wall connected to frame beams only under Various Loading conditions

Ali Asghar hosseinzade, ali kazemi, Mohammad Ali Barkhordari and 1 more

Journal of Structural and Construction Engineering · 2020

doi:10.22065/jsce.2019.145512.1652 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In the present paper, the behavior of steel shear walls connected to frame beams only was investigated under various loading conditions (nonlinear static, cyclic and blast) using the finite element method and compared with that of the corresponding system with fully-connected infill walls (typical SPSW). The obtained results were discussed in terms of strength, initial stiffness, ductility, max of Von-Mises stress and max of in-plane and out-of-plane deformations. In the study, the effects of different system aspect ratios and various infill plate thicknesses were also considered. The adequacy of the finite element modeling approach for representing the responses of SPSWs under loading conditions was verified through comparison with experimental results. Results of pushover analyses showed that releasing of the infill wall connection to the columns limits the widespread yielding of the infill plate. This, in turn, affects the strength, initial stiffness and ductility of the system. Notably, the behavior of SPSW frames is not affected much by such configuration. Increasing the infill plate thickness in proportion to the decrease of its strength, not only offsets the effect of this configuration on the system strength, but also improves the system behavior in terms of initial stiffness and ductility (compared to the corresponding system with infill plate connected to boundary columns and beams). Results of cyclic analyses showed that the dissipated energy by the semi-connected SPSW is relatively decreased mainly due to the decrease of plate strength and energy absorption. Results of analyses under blast loading condition showed that both fully-connected and semi-connected SPSWs designed for seismic loading can partially resist against out-of-plane blast loading effects without failure.

Abstract licence: CC BY-SA

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.