Skip to content
naulon
Not checkedNot checked for notices yet.

Modification of Asphalt Pavement with Polysulfide Polymer

Behzad Shirkavand Hadavand, Mansour Fakhri, Hani Yazdi Aznaveh

علوم و تکنولوژی پلیمر · 2013

doi:10.22063/jipst.2013.594 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In petrochemical industry, the production of polyvinyl chloride (PVC) is accompanied by formation of heavy end wastes which consist of a mixture of di and multichloro compounds as kind of materials which are generated in ethylene dichloride (EDC) purifcation. A high quantity of chloro compounds found in the heavy end waste allows it to be polymerized with alkaline polysulfdes to form polysulfde polymers. Thus, according to this, the environmentally hazardous heavy ends waste can now be converted into useful polysulfde polymers without any environmental problem. There are some methods for synthesizing a polysulfde polymer (PSP) from this waste. PSP with a rubbery property can be used for modifcation of bitumen. In this research the effects of polysulfde polymer (PSP) and the polysulfde polymer prepared by heavy end waste (wPSP) on bitumen and asphalt have been studied. Samples of 1, 3, 5% of PSP and wPSP as modifers in bitumen have been prepared and their physical and mechanical properties are compared. Using this new modifer causes a fall in softening point (PSP=39.5%, wPSP=27.6%) and increase in enetration point (PSP=17.8%, wPSP=15.5%) and in asphalt mixture it causes decreases in rutting but has a small effect on Marshall strength of asphalt samples (PSP=4%, wPSP=11.6%).

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.