Skip to content
naulon
Not checkedNot checked for notices yet.

Clogged Impeller Diagnosis in the Centrifugal Pump Using the Vibration and Motor Current Analysis

Mehran Jahangiri, Seyed Alireza Seyed Roknizadeh

Journal of Applied and Computational Mechanics · 2018

doi:10.22055/jacm.2018.24774.1211 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The impeller-clogging phenomenon in centrifugal pumps is such a kind of the fault that leads to increase the vibration and reduce the performance of pumps. In addition, impeller-clogging could make some problems in the production process of factories. This research assigns to the detection of clogged impeller in a centrifugal pump using the vibration and motor current analysis. In this research, a test rig is set up and one of the impeller’s passageways is clogged by the sealing tape. The clogging detection, based on the vibration analysis, is done using the Fast Fourier Transform (FFT). The obtained results show that the dominant frequency in the impeller-clogging phenomenon is the rotational frequency of impeller (1xRPM). The measuring vibration values in three directions (horizontal, vertical, and axial) show that the clogged impeller has more effects on the axial vibration responses. Furthermore, in this case, the electrical current consumption of electromotor is reduced

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.