Skip to content
naulon

Not checkedNot checked for notices yet.

Catalytic Oxidation of Carbon Monoxide by Cobalt Oxide Catalysts Supported on Oxidized-MWCNT

Mahnaz Pourkhalil, Saeideh Tasharrofi

Iranian Journal of Oil & Gas Science and Technology · 2018

doi:10.22050/ijogst.2017.105780.1421 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Cobalt oxide catalysts supported on oxidized multi-walled carbon nanotubes (MWCNT) for the low-temperature catalytic oxidation of carbon monoxide were prepared by an impregnation-ultrasound method. These catalysts were characterized by N<sub>2</sub> adsorption/desorption, TEM, XRD, Raman, and H<sub>2</sub>-TPR methods. The XRD and Raman results indicated that the phase of the synthesized cobalt oxide was in the Co<sub>3</sub>O<sub>4</sub> form. The effects of cobalt oxide loading and reaction temperature were studied on the catalytic oxidation conversion of carbon monoxide. The TEM image of the best catalyst (14 wt.% metal oxide loading) revealed a good dispersion of Co<sub>3</sub>O<sub>4</sub> over the surface of the support with an average particle size of 11-16 nm. Under the reaction conditions of <em>T</em>= 200-250 °C, <em>P</em>=1 bar, CO = 600 ppm, O<sub>2</sub> = 5 vol.%, GHSV = 30,000 hr.<sup>−1,</sup> and Co<sub>3</sub>O<sub>4</sub>= 14 wt.%, CO conversion was 91%.

Abstract licence: CC BY-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.