Skip to content
naulon

Not checkedNot checked for notices yet.

Сравнение двух вариантов пуска электропривода ленточного конвейера

В.Е. Павлов

Вестник Иркутского государственного технического университета · 2020

doi:10.21285/1814-3520-2020-5-1069-1079 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The purpose of the paper is to study the energy and operational parameters of a belt conveyor under two starting methods: direct and frequency. Taking into account the non-linearity of the mathematical description of belt conveyor mechanical part and induction motor drive, the analysis of starting modes is carried out by the method of nonlinear differential calculus where equivalent masses are replaced with the discrete ones. The calculations are performed on the models using MATLAB. It is found out that the use of a frequency converter for the conveyor allows to reduce the maximum current by 4.7 times when starting the motor; by 2.5 times the maximum moment; by 1.52 times the maximum moment of resistance forces on the motor shaft; by 8.68 times the maximum value of power losses in stator windings; by 10.2 times the total power losses; by 2.9 times the power consumed from the network; by 3.4 times the amount of energy losses in the stator windings; by 3 times the total energy losses; by 1.25 times the energy consumed from the network; by 3 times the maximum acceleration of the belt; by 3 times the overshooting values during transients by the values of leading tension forces of the belt on various sections of the conveyor; by 1.875 times the transients duration in terms of the leading tension forces of the belt on different sections of the conveyor. The developed mathematical model of the belt conveyor makes it possible to obtain quantitative estimates of energy and operational parameters of the installation under two starting methods: direct and frequency. The use of frequency start-up of the conveyor allows to decrease motor energy losses by 3 times. It also reduces motor heating as well as decreases the maximum values of belt tension forces on various sections of the conveyor by more than three times.

Abstract licence: CC BY

References14

    14 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.