Skip to content
naulon

Not checkedNot checked for notices yet.

Effect of multilayer structure parameters on magnetoimpedance ratio with low frequency measurements

Vina Oktaria, Candra Tirta Putra, Artono Dwijo Sutomo and 2 more

Journal of Physics: Theories and Applications · 2020

doi:10.20961/jphystheor-appl.v4i1.44694 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The magneto-impedance of the NiFe thin films is experimentally dependent on their structure. The multilayer structures of [NiFe/Cu]4 and [NiFe/Cu]2/Cu/[NiFe/Cu]2 on the meander structure PCB Cu substrate in this study were deposited using the electrodeposition method. The frequency was varied in order to determine its effect on the magneto-impedance ratio. The results of the magneto-impedance characterization measurement showed that the maximum MI ratio in the multilayer [NiFe/Cu]4 structure was 6.82% while in [NiFe/Cu]2/Cu/[NiFe/Cu]2 was 3.08% with a frequency of 100 kHz. The increase in the MI ratio in the low frequency range indicates that the MI ratio depends on the structure of the layer which is affected by the permeability of the magnetic material.

Abstract licence: CC BY-SA

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.