Not checkedNot checked for notices yet.
Measurement of gravitational acceleration with the leak tank method
Reliusman Dachi, Ikhsan Setiawan
Journal of Physics: Theories and Applications · 2018
doi:10.20961/jphystheor-appl.v2i1.29000 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
An experimental device of the mechanics of tank draining under gravity has been constructed. It mainly consists of a cylindrical tank with a circular orifice at the center bottom of the tank. The inner radius of the tank is 134 mm, while there are seven variations of orifice radius, those are 2.25 mm, 2.50 mm, 3.00 mm, 3.50 mm, 4.00 mm, 5.00 mm, and 6.00 mm. The tank is filled by water which is then allowed to flow out throuh the orifice. This experiment can be used to measure the value of gravitational acceleration () on the experiment location. We call this method as the leak tank method. The measurement of g is carried out by measuring the total time to drain the tank from 300 mm initial height of water surface inside the tank for various orifice radius. It is found in this experiment that = (9.89± 0.03) m/s2. This result is good enough because it is almost the same as the conventional standar value of 9.80665 m/s2 with discrepancy of around 0.85%. It indicates that the leak tank method which is described in this paper can be used to estimate the gravitational acceleration value with a good result.
Abstract licence: CC BY-SA
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.