Skip to content
naulon

Not checkedNot checked for notices yet.

STUDI RENDEMEN DAN KUALITA MOULDING BEBERAPA JENIS KAYU INDUSTRI INDONESIA (Study of moulding recovery and quality of several indonesia industrial woods)

Bakir Ginoga

Jurnal Penelitian Hasil Hutan (Journal of Forest Products Research) · 2017

doi:10.20886/jphh.1993.11.5.179-181 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The study describes moulding recovery and quality of seven Indonesian industrial wood species, i,e. meranti putih (shorea koordersii), sungkai (phenomena canescens jack). Cempaka (elmerillia ovalis dandy), dahu (dracontomelon dao), perupuk (solenospermum sp.) meranti merah (shorea sp.). and kapur (dryobalanops sp.). It is found that volume recovery varies from 38.7 to 80.2 per cent. An optimal allowances for moulding raw material are 3.0 mm in thickness and 9.6 mm in yidth Sungkai, dahu, perupuk and kapur species produced the best moulding quality. Moulding quality of the other species is found to be of good quality. The processing of cempaka and meranti species, especially on their radial surface or quarter swan timber, should be undertaken carefully because of they have genetical interlocked grains.

Abstract licence: CC BY-NC-SA

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.