A finite element study on the mechanical behavior of reciprocating endodontic files
Mohamed I. El-Anwar, Ayman O. Mandorah, Salah A. Yousief and 2 more
Brazilian Journal of Oral Sciences · 2015
doi:10.20396/bjos.v14i1.8640846 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Aim: To evaluate the mechanical behavior of reciprocating endodontic files, comparing nickeltitanium (NiTi) and stainless steel 316L (St.St. 316L) as manufacturing material for such instruments. Methods: A three-dimensional finite element model was designed for this study. The simplified instrument model geometry was created on commercial CAD/CAM software. Real strain stress curves of St.St. 316L and NiTi were used in the analysis. Non-linear static analysis was performed to simulate the instrument inside root canal at an angle of 45° in the apical portion, and subjected to torsion of 0.3 N.cm. Results: Non-linear NiTi material showed super elasticity and high functionality in such applications. Very high levels of stress appeared in the file at 3 mm from the tip close to yield point. Conclusions: St. St. 316L is not suitable for manufacturing reciprocating instruments. Modeling of the instrument with equivalent circular cross-sectional area did not affect results quality. Reciprocating instruments have short lifespan, thus manufacturers recommend using one file per tooth. Reciprocating instruments are recommended for less experienced dentist.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.