Fizikalne in mehanske lastnosti svežega in osušenega lesa v bukovih deblih, izruvanih med žledolomom
Željko Gorišek, Denis Plavčak, Dominika Gornik Bučar and 3 more
Acta Silvae et Ligni · 2017
doi:10.20315/asetl.112.2 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Physical and mechanical properties of beech wood (Fagus sylvatica L.) from trees fallen in ice storm were determined. The properties were studied in parallel green and dried beech-wood samples, systematically collected along the radius and at different height levels of the stem. The stiffness of the timber was comparatively tested with static 4-point bending and non-destructively by measuring the speed of ultrasound, and by determining the frequency response. The bending and shear strengths were additionally determined along the grain, as well as compression strength in all anatomical directions of wood. In blown down trees with still partly preserved root system, active crown and sufficient capillary water flow, we could not detect any reduction of mechanical properties due to deterioration. The density and mechanical properties, except transverse compression strength, increased with increasing height in the tree and radially from the pith to the cambium. They were always better in dried than in green wood. The reliability of non-destructive methods was greater in the evaluation of dried wood. We recommend visual wood characterisation in addition to the use of non-destructive methods for strength assessment of wood.
Abstract licence: CC BY-SA
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.