Skip to content
naulon

Not checkedNot checked for notices yet.

Preparation and properties of conductive anticorrosive coatings using Eucommia Ulmoides gum/carbon nanotube modified epoxy

ZHANG Yan; KANG Hai-lan; FANG Qing-hong

Hecheng xiangjiao gongye · 2022

doi:10.19908/j.cnki.issn1000-1255.2022.01.0054 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Conductive anticorrosive coatings were prepared by using Eucommia Ulmoides gum(EUG)and epoxy resin (E-51) as matrix and carbon nanotubes (CNT) as conductive filler. The effects of EUG amount on corrosion resistance and electrical conductivity of the coating were investigated. The thermal properties of the composite coating were analyzed by differential scanning calorimetry and dynamic thermomechanical, and the conductivity of the composite coating was tested by a four-probe tester, electrochemical impedance spectroscopy, salt spray test and adhesion were used to characterize the corrosion resistance and mechanical properties of the composite coating. The results showed that when the EUG amount was 8 phr, the conductivity of the coating film of the conductive anticorrosive coating prepared by this method reached 0.083 s/cm, and the electrochemical impedance was about 9×107 Ω·cm2. EUG had good compatibility with E-51, and the addition of EUG could improve the corrosion resistance and conductivity of the coating.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.