Skip to content
naulon

Not checkedNot checked for notices yet.

Hydrogenation of styrene-isoprene-styrene block copolymer and its product properties

LIANG Ai-min

Hecheng xiangjiao gongye · 2021

doi:10.19908/j.cnki.issn1000-1255.2021.05.0342 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The hydrogenation of styrene-isoprene-styrene block copolymer(SIS) was catalyzed by nickel-based catalyst, and the mechanism of catalytic reaction was studied. The conditions of catalyst preparation and hydrogenation were determined, and the structure and performance of the product were investigated. The results showed that the activity and selectivity in hydrogenation was high with nickel isooctanoate and triisobutyl aluminum as SIS hydrogenation catalysts. The conditions of the reactions were optimized with the mole ratio of aluminum to nickel was 3.0~4.0 and the mass concentration of nickel and aluminum catalyst was 25~40 g/L at aging temperature 50-70 ℃ for more than 30 min. The hydrogenation degree of polyisoprene segment in SIS was greater than 98% and the benzene ring was less than 5% with the catalyst amount 3×10-4~7×10-4 g/g for 1~2 h. The mechanical properties and aging resistance of SIS were significantly improved after hydrogenation.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.