Not checkedNot checked for notices yet.
Analysis of Vibration in Payload Room Due to Engine Vibration on LSU-05 NG
Yusuf Giri Wijaya, Nur Mufidatul Ula, M. Muksin and 1 more
Computational and Experimental Research in Materials and Renewable Energy · 2021
doi:10.19184/cerimre.v4i1.24963 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
LSU-05 NG is one of the unmanned air vehicles (UAV) developed by the aviation technology center LAPAN. The LAPAN aviation technology center designed the LSU-05 NG to be able to carry a larger payload and broader range than other types of LSUs. Therefore, the LSU-05 NG uses an engine that has enough power. LSU-05 NG uses a piston-type engine with a capacity of 170 CC. UAV engine is the primary source of vibration in the UAV structure. Excessive vibration can cause damage to the UAV structure and malfunction of the UAV payload, such as sensors, control systems, and cameras. In this research, vibration measurements were carried out at 2 locations. The measurement location is on the engine and where the payload is installed. The vibration measurement on the LSU-05 NG was carried out during the ground test. The accelerometer sensor is used to measure vibrations and is connected to the NI data acquisition system and displayed with LabVIEW. The data to be taken are acceleration and frequency data with variations in the RPM value on the LSU-05 NG engine. With these measurements, the vibration characteristics caused by the engine in the LSU-05 NG structure, primarily where the payload is stored, can be known.
Abstract licence: CC BY-SA
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.