Not checkedNot checked for notices yet.
Constructing 3D fan blade models in CAD-system on the basis of coordinate measuring techniques
A. N. Arkhipov, Yu. A. Ravikovich, I. M. Fedorov and 1 more
Вестник Самарского университета: Аэрокосмическая техника, технологии и машиностроение · 2017
doi:10.18287/2541-7533-2017-16-3-7-16 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Methods of coordinate measurement are reviewed and a possibility of their usage for fan blade geometry characterization and construction of a 3D CAD model is evaluated with account for actual blade airfoil deviations. Different components of blade geometry deviation from nominal geometry are considered. A technique of constructing a 3D model in a CAD-system on the basis of coordinate measurement, considering real manufacturing deviations of an airfoil is presented. To allow deformation of the nominal model according to the measurement data, the nominal model of the airfoil was recreated with account for the location of the measured sections. The issue of adding the measured profile of the blade root, edges and the peripheral area of the airfoil to the model is discussed. The influence of deviations of the out-of-the-flow path profile on the mechanical characteristics is assessed. A model with maximum and minimum deviations possible was constructed. Expected displacements and natural frequencies of the model were compared to the nominal ones. Further direction of investigation to determine airfoil geometry parameters most efficient for robust optimization is presented.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.