A comparative study on some mechanical properties of black pine and black poplar woods
Bekir Cihad Bal, Ümit Ayata
Turkish Journal of Forestry · 2020
doi:10.18182/tjf.795698 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Pine and poplar wood types grow in many places in Turkey. Each tree species has different physical and mechanical properties due to its anatomical structures. In this study, some physical and mechanical properties of black pine (Pinus nigra) and black poplar (Populus nigra L.) wood were investigated, and compared with each other. According to the results of the research, moisture content, air-dried density, bending strength, modulus of elasticity, compression strength and impact bending strength of black pine wood were 9.77%, 508 kg/m3, 118.7 N/mm2, 9789 N/mm2, 57 N/mm2, 0.416 kgm/cm2, respectively. In addition, moisture content, air-dried density, bending strength, modulus of elasticity, compression strength and impact bending strength of black poplar wood were 9.81%, 396 kg/m3, 75.1 N/mm2, 5438 N/mm2, 42 N/mm2, 0.438 kgm/cm2, respectively.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.