Skip to content
naulon

Not checkedNot checked for notices yet.

Study Experimental and Numerical Simulations of the Micro-hardness Tests in AL-FE alloy in Different Laser Beam Scanning

Moises Meza Pariona

Ingeniería y Ciencia · 2019

doi:10.17230/ingciencia.15.30.3 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In the Al–2.0 wt.%Fe alloy the laser surface remelting (LSR) treatment was executed to investigate the treated and untreated layers areas, at different laser beam scanning, among them, 80, 100 and 120 mm/s, to respect, was presented and discussed about microstructural characteristics using the FEG and EDS techniques, and numerical experiments of pyramidal indentations of the LSR-treated systems were conducted using the FEM method. In the sample-treated cross-sectional area, the microstructure presented a columnar growth characteristic, a lot of nano-porosities and large size of the molten pool geometry in low laser beam scanning, however, in high laser beam scanning, the microstructure consisted of a cellular arrangement or fine-grained microstructure, the nano-porosities concentration and the molten pool geometry are slightly decreased. Besides, the micro-hardness in the LSR-treated area increased slightly as a function of increase of the laser beam scanning, but, the micro-hardness was much higher than the untreated sample. Meanwhile, modeling of indentation on COMSOL of the LSR-treatment by finite element method of the micro-hardness was successfully calculated. Therefore, a good agreement was found between experimental and simulated data.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.