Skip to content
naulon

Not checkedNot checked for notices yet.

Measurement and verification of a lighting load reduction project through energy efficiency

Idah Masopoga, Christo van der Merwe, L.J. Grobler

Journal of Energy in Southern Africa · 2017

doi:10.17159/2413-3051/2009/v20i3a3305 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This paper will describe the methodology and pro-cedures that were followed to measure and verify the impact on the electricity use of a lighting load reduction project implemented at a gold mine. The lighting retrofit was concentrated on the 100 level and 100 incline of the gold mine. Since the lights were underground, it was operational for 24 hours each day. The proposed project activity aimed to reduce the electric demand of the lighting system by replacing the current types of lighting fixtures with more energy efficient units.The possibility existed to reduce the lighting load by 157 kW. These impacts needed to be assessed in order to verify the DSM impacts and savings for the client, the ESCO and Eskom. Pre-implementation metering was done in order to determine the oper-ational and installed capacity of the original lighting system. Together with the number of lights affected by this project activity and the 24-hour operational profile, this data defined the baseline electricity use of the project. The same metering techniques and layout have been used after implementation to determine the new installed and operational capac-ity of the new lighting system. This project achieved 99.36% of its contracted target of 157kW.

Abstract licence: CC BY-SA

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.