Skip to content
naulon
Not checkedNot checked for notices yet.

Study on milling process and optimization of pick entry sequence of double-wheel trench cutter

XIAO Jian-cheng, ZHOU Hui, LU Jing-jing and 2 more

Rock and Soil Mechanics · 2022

doi:10.16285/j.rsm.2021.6025 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Double-wheel trench cutter is a professional construction equipment of underground diaphragm wall, and its tooth arrangement system is its core component. The parameter design of tooth arrangement system is closely related to rock breaking performance. In this study, a three-dimensional simulation method for milling rock and soil with milling wheel is developed using the continuum-discontinuum element method (CDEM). On this basis, considering the correlation between free surface and milling, the mechanism of the influence of cutting sequence on rock breaking performance of tooth arrangement system is studied, and a numerical generalization model of rock entry sequence is established under the condition of associated milling, in which the number of adjacent free surfaces is preset as the main influencing factor. The results show that: (1) The curves of milling force and milling depth obtained by milling wheel milling rock and soil mass verify the correctness of the numerical simulation method. (2) Compared with the intact rock mass, the peak load of rock samples with single adjacent preset free surface and double adjacent preset free surface decreased by 32.5% and 68.2% respectively, and the energy consumption of rock breaking decreased by 19.8% and 56.6%, respectively. (3) In the tooth arrangement system, the larger the ratio of the number of pick against double adjacent preset free surfaces to the total number of picks, the lower the overall energy consumption of the tooth arrangement system, and the energy consumption of the heterogeneous tooth arrangement system is lower than that of the sequential one. The research results provide a basis for improving the rock breaking process and tooth arrangement system optimization of double-wheel trench cutter.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.