Not checkedNot checked for notices yet.
Design and research on digital baseband of RFID tag based on SystemVerilog
Wang Yongfeng, Bu Gang
Dianzi Jishu Yingyong · 2021
doi:10.16157/j.issn.0258-7998.200868 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Based on the ISO/IEC 18000-6C standard protocol, this paper conducted research on the design and implementation of UHF RFID tag′s physical layer baseband circuit. According to the design requirements and indicators of the baseband specified in the standard protocol, SystemVerilog was used to model the tag sending and receiving basebands, and the theoretical derivation and design implementation of the key modules in the baseband were given. SystemVerilog, as a hardware description and verification language developed on the basis of Verilog, can greatly improve the efficiency of SoC design. Finally, Modelsim SE-64 10.4 was used to simulate the digital baseband circuit design of the tag. The results showed that the digital baseband met the requirements of ISO/IEC 18000-6C protocol. This design provides a design reference for single-chip UHF RFID tag.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.