Not checkedNot checked for notices yet.
Morphological evaluation of the active tip of six types of orthodontic mini-implants
Flávia Mitiko Fernandes Kitahara-Céia, Tatiana Féres Assad-Loss, José Nelson Mucha and 1 more
Dental Press Journal of Orthodontics · 2013
doi:10.1590/s2176-94512013000200012 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
OBJECTIVE: To morphologically evaluate the active tip of six different types of self-drilling mini-implants for orthodontic anchorage. METHODS: Images of the active tips of the mini-implants were obtained with a Zeiss optical microscope, Stemi 200-C with magnification of 1.6X. The images of the surface were viewed with the Axio Vision program (Zeiss, Jena, Germany) to calculate linear and angular measures. Mini-implant morphology and the details of tips and threads were also evaluated through Scanning Electronic Microscopy (SEM) (JEOL, model JSM5800 LV - JEOL, Tokyo, Japan) with magnifications of 90X and 70X, respectively. The evaluation of the mini-implant taper shape was assessed using to the formula: (b - a) / (2 x D). RESULTS: The following variables were measured: (1) active tip width, (2) major diameter of external thread, (3) minor diameter of internal thread and taper of the mini-implant, (4) number of threads and lead of the screw, (5) angle of thread, (6) flank width and (7) pitch width. CONCLUSION: Mini-implants from different manufacturers presented active tips with different characteristics. Mechanical testing is necessary to cor-relate the analyzed characteristics aiming to determine the best performance.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.