Skip to content
naulon

Not checkedNot checked for notices yet.

Experimental and numerical characterization of the interface between concrete masonry block and mortar

R. D. PASQUANTONIO, G. A. PARSEKIAN, F. S. FONSECA and 1 more

Revista IBRACON de Estruturas e Materiais · 2020

doi:10.1590/s1983-41952020000300008 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract Masonry is a construction system that has been used since the beginning of civilization and is still used throughout the world. The finite element method is a recent development that allows complex problems, including structural masonry problems, to be solved. A vast amount of literature exists on finite element modeling, using software such as ABAQUS, to represent experimental masonry models. Based on this established pattern, an experimental and analytical research program was designed and implemented. Thus, a set of tests was conducted to determine the compressive and tensile strengths of the masonry components, i.e., block, mortar, and grout. Bond wrench tests, diagonal tension tests, and horizontal joint shear tests were conducted to characterize the interface between the blocks and the mortar. A finite element model was then developed to represent the physical models and the general conclusion is that the finite element model was able to represent reasonably well the physical models.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.