Skip to content
naulon

Not checkedNot checked for notices yet.

Effect of the mechanical properties and mode loading on the mechanical behaviour of weldment: a numerical analysis

Meddah Hadj Miloud, Ould chikh Bahri, Benhamena Ali and 2 more

Materials Research · 2013

doi:10.1590/s1516-14392013005000064 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Welding is used to realize permanent assembly in mechanical structures to assure the continuity of the parts to be assembled contrary to the other assembly techniques which have physical or chemical discontinuities. Generally, crack evolution depends on several intrinsic and extrinsic parameters of material. The aim of this work is to analyse the severity of crack defects on the mechanical behaviour of Welded joints. The cracks are considered located in the weld metal. The J-integral method was used to analyse the fracture behaviour of these structures by the two-dimensional finite element method using Cast3M code. The effect of the mechanical properties, the mismatching and the crack size on the J-integral values was highlighted. A good correlation between the FEM simulations and the literature analysis results was observed. We note that the loading mode affects directly the J-integral value and consequently on the mechanical behaviour of the weldment.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.