Skip to content
naulon

Not checkedNot checked for notices yet.

Application of ANFIS for modeling of microhardness of high strength low alloy (HSLA) steels in continuous cooling

Gholamreza Khalaj, Ali Nazari, Akbar Karimi Livary

Materials Research · 2013

doi:10.1590/s1516-14392013005000052 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The paper presents some results of the research connected with the development of new approach based on the Adaptive Network-based Fuzzy Inference Systems (ANFIS) of predicting the Vickers microhardness of the phase constituents occurring in five steel samples after continuous cooling. The independent variables in the model are chemical compositions, initial austenite grain size and cooling rate over the temperature range of the occurrence of phase transformations. To construct these models, 114 different experimental data were gathered from the literature. The data used in the ANFIS model is arranged in a format of twelve input parameters that cover the chemical compositions, initial austenite grain size and cooling rate, and output parameter which is Vickers microhardness. In this model, the training and testing results in the ANFIS systems have shown strong potential for prediction of effects of chemical compositions and heat treatments on hardness of microalloyed steels.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.