Skip to content
naulon

Not checkedNot checked for notices yet.

Workability studies on cold upsetting of sintered copper alloy preforms

Ananthanarayanan Rajeshkannan

Materials Research · 2010

doi:10.1590/s1516-14392010000400006 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The major concern of the design for manufacturability is to accomplish the require deformation without failure of work material. The degree of deformation that can be achieved in a particular metal forming process without creating condition is termed as workability. The present investigation pertains to study the cold workability behaviour of Cu-7%Al-1.8%Si sintered preforms. Cold upsetting of these preforms with various aspect ratios were carried out and the working behaviour of the preforms at various stress state conditions was computed. The analysis measured for different components such as stress formability index and obtained density during secondary deformation as a function of induced strain. Similarly various computed stress ratio parameters with induced strain.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.