Not checkedNot checked for notices yet.
The Effect of Experimental Denture Cleanser Solution Ricinus communis on Acrylic Resin Properties
Marina Xavier Pisani, Cláudia Helena Lovato da Silva, Helena de Freitas Oliveira Paranhos and 2 more
Materials Research · 2010
doi:10.1590/s1516-14392010000300015 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
This study evaluated heat-polymerized (HPR) and microwave-polymerized acrylic resins (MPR), after immersion in water, 1% hypochlorite and Ricinus communis solution (RC). Knoop hardness, color alteration, roughness and flexural strength tests were performed after obtaining the specimens and after time intervals of 15 (T15) and 183 (T183) days. Variations in data (Δ) were submitted to ANOVA and Tukey tests (P = 0.05). For ΔT15 HPR there was greater variation in hardness when immersed in water (P = 0.00) and for MPR, after immersion in RC (P = 0.00). RC caused the greatest variation in roughness (P = 0.015). Color alteration was not significant (P = 24.46). Hypochlorite caused a decrease in flexural strength (P = 0.37). After ΔT183, hypochlorite and RC caused a decrease in HPR hardness value (P = 0.00). MPR showed the greatest variation in roughness (P = 0.01). HPR presented the most color alteration after immersion in RC (P = 0.214). Hypochlorite and RC caused the lowest flexural strength values for MPR (P = 0.89). RC caused alterations in resin properties, and was not shown to be superior to hypochlorite.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.