Not checkedNot checked for notices yet.
Duplex Al-based thermal spray coatings for corrosion protection in high temperature refinery applications
Adriana da Cunha Rocha, Fernando Rizzo, Chaoliu Zeng and 1 more
Materials Research · 2004
doi:10.1590/s1516-14392004000100025 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The application of thermal spray coatings has been effective in preventing corrosion of steel and iron products. It has been used in a wide range of applications spreading from the petroleum to the food industry. In this work, the performance and effectiveness of a two-layered aluminum-based thermal spray coating applied to an ASTM A387 G11 steel was evaluated. The coating structure was comprised of an inner Al-Fe-Cr layer and an outer layer of aluminum. Coated samples were tested in the reactor zone of a fluid catalytic cracking unit (FCCU) of a petrochemical plant for 2.5 years. The reactor zone temperature was about 793 K (520 °C) and the environment was a mixed gas containing sulfur, oxygen and carbon. Laboratory-scale tests were also conducted on the coated samples in order to gain a better understanding of the corrosive effect of the gaseous species present in the FCCU atmosphere. Porosity present in the thermal spray coatings allowed the penetration of the atmosphere corrodents, which instigated intergranular corrosion of the steel substrate. The presence of an inner Al-Fe-Cr layer did not prevent coating spallation, which further contributed to the internal corrosion process.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.