Skip to content
naulon

Not checkedNot checked for notices yet.

Sinterização ultra-rápida de materiais cerâmicos usando radiação laser Ultra-fast laser sintering of ceramic materials

Z. S. Macedo, A. C. Hernandes

Cerâmica · 2000

doi:10.1590/s0366-69132000000400005 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Nessa comunicação apresentamos nossos primeiros resultados de sinterização ultra-rápida em materiais cerâmicos óxidos usando a radiação de um laser de CO2 como fonte de aquecimento. Os compostos Bi4Ti3O12 (BIT) e Bi4Ge3O12 (BGO) foram sintetizados via reação do estado sólido, conformados em corpos cerâmicos cilíndricos de 12 mm de diâmetro e 2 mm de espessura e, posteriormente, levados ao laser para o processo de sinterização. A análise dos pós reagidos, efetuada por difratometria de raios X, confirmou a presença de fase cristalina única em cada um dos sistemas investigados. A potência máxima do laser necessária para a sinterização apresentou forte dependência com a estratégia usada na irradiação. A análise da microestrutura, realizada por microscopia eletrônica de varredura (MEV), revelou um alto grau de eficiência do processo desenvolvido. Em alguns casos, pudemos verificar que a sinterização ocorreu a uma profundidade de até 1 mm, apontando para a viabilidade de obtenção de corpos cerâmicos sinterizados como um todo.<br>In this communication we present our first results on ultra-fast laser sintering of oxide ceramics employing a CO2 laser as the heating source. The Bi4Ti3O12 (BIT) and Bi4Ge3O12 (BGO) compounds were synthesized following a solid state route in air atmosphere. Cylindrical ceramic bodies with 12 mm in diameter and 2 mm in thickness were shaped and sintered under laser irradiation. The X-ray diffraction of the calcined powders confirmed the presence of single phase in each of the investigated systems. The maximum laser power required to the sintering process showed to have a strong dependency on the strategy used for irradiation. The microstructure analysis of the samples, performed by scanning electron microscopy (SEM), revealed the high efficiency of the process. In some cases we could verify that the sintering occurred until a depth of 1mm, indicating the feasibility of obtaining the ceramic bodies sintered as a whole.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.