Skip to content
naulon

Not checkedNot checked for notices yet.

Influence of Nonionic Surfactant Hydrophobicity on the Tribological Properties of Microemulsion Systems Aimed at Cutting Fluid Applications

Erinéia da Silva Santos, Igor Micael Alves Uchôa, Ricardo Paulo Fonseca Melo and 4 more

Materials Research · 2022

doi:10.1590/1980-5373-mr-2021-0584 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract The development of new environmentally-friendly cutting fluids is an important technological advancement. The aim of this study was to assess the tribological behavior of microemulsions (W/O) developed with epoxidized soybean oil and nonionic surfactants with different degrees of ethoxylation (NP4EO, NP6EO and NP9.5EO). The tribological performance of the microemulsion systems was assessed in a High Frequency Reciprocating Rig (HFRR) tribometer. Microemulsions showed Newtonian fluid behavior, with viscosities compatible with conventional cutting fluids. In addition, contact angle values above 90º indicate spherical-shaped drops on the surface on which they are deposited, due to their hydrophobic nature. The microemulsions formulated using surfactants with lower ethoxylation numbers and 20% concentration exhibited greater stability, lower viscosity and better friction reduction during tribological contact between surfaces, given that the average wear scar diameter was 118 µm with smooth surfaces exhibiting slight slippage wear caused by abrasion, as identified by SEM/EDS analyses.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.