Not checkedNot checked for notices yet.
An Investigation on the Effect of Heat Treatment on the Compression Behavior of Aluminum Matrix Syntactic Foam Fabricated by Sandwich Infiltration Casting
Çağın Bolat, Gökhan Bilge, Ali Gökşenli
Materials Research
doi:10.1590/1980-5373-mr-2020-0381 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Abstract In this research, syntactic foams including Al-7075 matrix and 2-4 mm low-cost pumice particles were manufactured via a novel casting method called as sandwich infiltration. According to physical evaluations, thanks to extremely porous structure of pumice, density values of the fabricated foams varied between 1.42 and 1.61 g/cm3. Porosity values were between 40.62% and 47.39%. Microstructural observations showed that there was a perfect infiltration between Al matrix and pumice particles because of correct process optimization (process pressure of 0.1 MPa, matrix melting temperature of 720°C and filler pre-temperature of 500°C). Furthermore, T6 treatment was applied to samples to comprehend effect of the aging on mechanical properties. The results indicated that there was an affirmative relation between the heat treatment and quasi-static compressive properties of the fabricated foams. The highest compressive strength, plateau stress and energy absorption values were measured as 64.4 MPa, 74.3 MPa and 34 MJ/m3 for heat treated samples. It was also observed that although the highest energy efficiency of 0.89 was calculated for heat treated sample, there was no relation between the heat treatment and efficiency. As for failure modes, as-cast samples exhibited ductile barreling characteristic whereas T6 treated foams indicated brittle v-shape fracture.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.