Skip to content
naulon

Not checkedNot checked for notices yet.

Influence of Different Concentrations of Silicon, Copper and Tin in the Microstructure and in the Mechanical Properties of Compacted Graphite Iron

B. C. M. Ribeiro, F. M. Rocha, B. M. Andrade and 2 more

Materials Research

doi:10.1590/1980-5373-mr-2019-0678 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract In this paper the production and characterization of compacted graphite iron alloys in ten chemical compositions is presented. The specimens were obtained through a foundry process performed by a gating system model developed in order to allow the incorporation of silicon, copper and tin. Hardness and tensile tests were performed, as well as microstructural evaluation. Additionally, the results related to the experimental investigation were compared to those obtained from a finite element method analysis. The results showed a correlation between the addition of silicon and the increase of ferrite and graphite count per mm2. Regarding copper and tin additions, the percentage increase of pearlite was associated with the reduction of graphite average size. Changes in chemical composition led to different values of ultimate tensile strength, yield strength and hardness, whose magnitude was mainly related to the amount of ferrite. Computer simulation was considered efficient in predicting these results.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.