Skip to content
naulon

Not checkedNot checked for notices yet.

Cost-Effective Thin n-type Silicon Solar Cells with Rear Emitter

Adriano Moehlecke, Tatiana Lisboa Marcondes, Jéssica de Aquino and 2 more

Materials Research · 2020

doi:10.1590/1980-5373-mr-2019-0536 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract The silicon solar cells achieved relatively low prices in the last years and to introduce a new structure in the PV industry, the amount of silicon per watt has to be reduced, requiring a cost-effective manufacturing process. The use of n-type solar grade silicon has the advantages of presenting higher minority carrier lifetime than p-type one and the absence of the boron-oxygen defects. The aim of this paper is to present the development of 100 μm thick n+np+ silicon solar cells with a selective p+ rear emitter formed by boron deposited by spin-on and an Al/Ag grid deposited by screen-printing. The firing temperature of Ag/Al (rear face) e Ag (front face) was optimized and the temperature of 840 °C produced the devices with higher efficiency. The solar cells presented efficiencies of 16%, achieving a low silicon consumption of 1.6 g/W, 40% lower than thick p-type devices produced by the same process.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.