Skip to content
naulon

Not checkedNot checked for notices yet.

Nanoparticles of Ni1-x Znx Fe2 O4 used as Microwave Absorbers in the X-band

Emília dos Santos Monteiro, Raphael Barata Kasal, Náhrima Chambela Moraes and 3 more

Materials Research · 2019

doi:10.1590/1980-5373-mr-2019-0188 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Ferrites nanoparticles of Ni1-xZnxFe2O4 ferrites with x varying between 0 and 1, in steps of 0.2, were obtained by solution combustion synthesis (SCS) and dispersed in oil paint at the concentrations of 10, 20, 30 and 40% by ferrite weight of ferrite, with the aim of producing electromagnetic wave absorbing composites, in the X band (8-12 GHz). The ferrite powders obtained were characterized by X-ray diffraction (XRD), and to determine to mean crystallite size, crystallographic phases, as well as lattice parameters, was used the Rietveld method. The XRD results revealed the majority presence of the spinel cubic ferrite phase for all stoichiometries with crystallite size between 44 and 81 nm. The composites were characterized by the rectangular waveguide transmission line method to measure the absorption of the electromagnetic wave in the X band. The nanocomposites with 40% of NiFe2O4 and Ni0.8Zn0.2Fe2O4 presented the highest electromagnetic wave absorption performance.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.