Skip to content
naulon

Not checkedNot checked for notices yet.

Morphology and Phase Formation During the Solidification of Al-Cu-Si and Al-Ag-Cu Ternary Eutectic Systems

Carina Morando, Osvaldo Fornaro

Materials Research · 2018

doi:10.1590/1980-5373-mr-2017-0930 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The microstructure of ternary alloys in the Al rich corner of the Al-Cu-Si and Al-Ag-Cu systems were analyzed in order to determine the solidification path in the different structural regions expected from the equilibrium phase diagram. The analysis was based on theoretical models developed in the literature for solidification of ternary eutectic system alloys under simple lever rule assumptions. Optical microscopy (OM), scanning electron microscopy (SEM) and energy dispersive X-ray microanalysis (EDAX) were used to study the microstructure formed in each case. The observations were consistent with model predictions: Al-Cu-Si system showed two binary eutectics: non faceted-non faceted (nf-nf) AlCu and faceted-non faceted (f-nf) AlSi, Al-Ag-Cu system showed 2 binary regular eutectics (nf-nf) and a ternary semi-regular Brick type eutectic. The results provided an example of a methodology for use in ternary and multicomponent alloys.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.