Not checkedNot checked for notices yet.
Using Severe Plastic Deformation to Fabricate Strong Metal Matrix Composites
Megumi Kawasaki, Terence G. Langdon
Materials Research · 2017
doi:10.1590/1980-5373-mr-2017-0218 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The processing of bulk metals through the application of severe plastic deformation leads to significant grain refinement and a consequent strengthening of the material. High-pressure torsion (HPT) generally refers to the processing of disk samples and this technique is especially effective in producing extremely small grains. Recently, new experiments were conducted in which disks of two different alloys, based on aluminum and magnesium, were stacked together and then processed by HPT for up to 20 turns at room temperature. Analysis after processing revealed the formation of a multi-layered structure in the central region of the disks but with a true nanoscale microstructure containing different types of intermetallic compounds within an Al matrix leading to the formation of metal matrix nanocomposites at the disk edges. Measurements showed a lowering of density at the disk edges, thereby confirming the potential for using HPT to fabricate materials with exceptionally high strength-to-weight ratios.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.