Skip to content
naulon
Not checkedNot checked for notices yet.

Thermo-Elastic Analysis of Clamped-Clamped Thick FGM Cylinders by Using Third-Order Shear Deformation Theory

H. Gharooni, M. Ghannad, M.Z. Nejad

Latin American Journal of Solids and Structures

doi:10.1590/1679-78252254 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract Using the third-order shear deformation theory (TSDT), an analytical solution for deformations and stresses of axisymmetric clamped-clamped thick cylindrical shells made of functionally graded material (FGM) subjected to internal pressure and thermal loading are presented. The material properties are graded along the radial direction according to power functions of the radial direction. It is assumed that Poisson's ratio is constant across the cylinder thickness. The differential equations governing were generally derived, making use of TSDT. Following that, the set of non-homogenous linear differential equations for the cylinder with clamped-clamped ends was solved, and the effect of loading and supports on the stresses and displacements was investigated. The problem was also solved, using the finite element method (FEM), and the results of which were compared with those of the analytical method. Furthermore, the effect of increases in the temperature gradient on displacement and stress values has been studied. Finally, in order to investigate the effect of third-order approximations on displacements and stresses, a comparison between the results of first- and third-order shear deformation theory has been made.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.