Skip to content
naulon

Not checkedNot checked for notices yet.

Formation of Mo−Si−Ti Alloys by Self−propagating Combustion Synthesis

Jie Wu, Gaoming Zhu, Peizhong Feng and 3 more

Materials Research · 2015

doi:10.1590/1516-1439.011815 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Test specimens with nominal compositions MoSi2, (Mo0.9Ti0.1)Si2, (Mo0.8Ti0.2)Si2, (Mo0.7Ti0.3)Si2, (Mo0.6Ti0.4)Si2, (Mo0.5Ti0.5)Si2 and (Mo0.4Ti0.6)Si2 were prepared by combustion synthesis. The combustion mode, propagation velocity of combustion wave, combustion temperature and product structure were investigated. Specimens MoSi2, (Mo0.9Ti0.1)Si2, (Mo0.8Ti0.2)Si2, (Mo0.7Ti0.3)Si2, underwent spontaneously self−propagating combustion synthesis. However, the (Mo0.6Ti0.4)Si2 and (Mo0.5Ti0.5)Si2 specimens required a sustainable energy supply to complete the combustion synthesis reaction. There was no combustion synthesis reaction in specimen (Mo0.4Ti0.6)Si2. The combustion wave propagated along a spiral trajectory from top to the bottom of the specimen compacts in a layer by layer mode. The propagation velocity of the combustion wave reduced with the addition of titanium. The X-ray diffraction analysis showed that the Cllb-MoSi2 and C40-(Mo,Ti)Si2 type phases were formed during combustion synthesis. The intensity of diffraction peaks of C40-(Mo,Ti)Si2 phase increased with Ti content.

Abstract licence: CC BY

References37

    37 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.