Skip to content
naulon
Not checkedNot checked for notices yet.

Numerical simulations of ceramic firing in catenary kilns

J. A. da Silva, G. G. Nery, L. C. Gómez and 2 more

Cerâmica · 2022

doi:10.1590/0366-69132022683883349 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract Kiln geometries were developed to reach homogeneous temperatures above 900 °C, during the firing process, aiming to improve the production process of the ceramists from Vale do Jequitinhonha (MG/Brazil). Techniques of reactive flow numerical solution using the software Ansys CFX have been used to foresee the behavior of the firings. Two types of catenary geometries, simple and robust, were studied, capable of being easily reproduced. The firewood used as an energy source in the current kilns and the developed ones, in this research project, favored the control of the kiln’s atmosphere during the firing, beyond being a source found with easiness for the ceramists. The results of the numerical simulations demonstrated the energy efficiency of the kilns and the level of temperature reached. Knowing well thermal and gas dynamic behavior, some parameters of the burning could be improved, aiming for a better quality of used ceramics.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.