Skip to content
naulon
Not checkedNot checked for notices yet.

The use of tire rubber in the production of high-performance concrete

F. M. Silva, E. J. P. Miranda Jr., J. M. C. Dos Santos and 3 more

Cerâmica

doi:10.1590/0366-6913201965s12598 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract The advances in concrete technology lead to the search for alternative materials that provide improvements in concrete properties while at the same time collaborating with sustainable practices in construction. In this study, the influence of the incorporation of waste tire rubber on the mechanical properties of high-performance concrete was discussed. The waste rubber from the tire retreading process was used in partial substitution of the fine aggregate (sand) in the percentages of 7.5%, 15% and 30% with respect to the mass of the sand. For the characterization of the concrete, the following tests were carried out: water absorption, void index, specific density, compressive strength, flexural tensile strength, modulus of elasticity and microscopy analysis. The incorporation of rubber as aggregate in high-performance concrete proved to be promising for the production of a structural concrete with special characteristics, besides collaborating with the proper disposal of waste tires.

Abstract licence: CC BY-NC

References2

    2 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.