Skip to content
naulon
Not checkedNot checked for notices yet.

System of cutting force data acquisition in mechanical lathes

Felipe Sineider Martins, Rodrigo Reina-Muñoz, Valdemir Martins Lira

Dyna · 2018

doi:10.15446/dyna.v85n207.67537 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This report concerns a data acquisition system with the final idea of measuring the cutting force in the threading process done on a conventional lathe. Analytical models are used to find the depth of cut of the machining tool. This is important because the machining force can be responsible for the tool collapse by plastic edge deformation. The cutting force was obtained through direct measurements in selected samples. This allows obtaining more realistic data compared with data obtained by analytical estimation from theory. The data acquisition system was implemented in LabView®, and it allowed analyzing the several variables involved in the machining process on conventional lathes. In such a way, it is possible to find out, in real time, the depth of cut variable. Specifically, the authors present results obtained from analysis of Fredericks, Sandvik and Lira models. This analysis allows drawing conclusions about the cutting force from each model.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.